Figure Number: 3-RAH-7
A roller-bearing pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3" pipe (inside diameter) or up to 3 3/4" (outside diameter) pipes.
Base Material: Polycarbonate Size: The deck base is 7.50" by 10" and has a maximum cradle width of 4". Max Pipe Size: 3" inside diameter and 3.75" outside diameter. Max Pipe Clearance: The 3-RAH can adjust in height from a low of 3.5" to a high of 7" in elevation above the roof membrane. Max Load Weight: Maximum load weight may not exceed 115 lbs. per pipestand. Spacing: Manufacturer's recommended spacing is not to exceed 10 foot centers depending upon the load.