Figure Number: 6-H
A "roller-bearing" or "clevis hanger" pipe support hanger used to support roof-mounted gas pipes, HVAC piping, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate or steel roller or clevis hanger. The pipe support base is made of polycarbonate resin and all metal parts are made of stainless steel or hot-dip galvanized steel. Pipestand will accommodate up to 6" pipe (inside diameter) or up to 7.25" (outside diameter) pipes.
Base Material: Polycarbonate Size: Each of the two deck bases is 9" by 15.25". Max Pipe Size: 6" inside diameter and 7.25" outside diameter. Max Pipe Clearance: Can adjust in height to support pipe from a low of 6" to a high of 36" in elevation above the roof membrane. Max Load Weight: Maximum load weight not to exceed 300 lbs. per pipestand or 150 lbs. on each base. Spacing: Manufacturer's recommended spacing is not to exceed 10 foot centers depending upon the load. Do not exceed 300 lbs. load weight.